Laboratory workbench selection is a step, but also consider the actual installation problems, placed in a reasonable position, the relationship between the safe use of the laboratory.

In terms of installation, try to avoid facing the road personnel through the frequent site, do put the window underground, do cover the entrance exit to affect the opening closing of the door, do put on the opposite placed in the corner wall. Installation should also pay attention to the following issues:

1, to consider the size of the laboratory bench, leaving some space for the exhaust.

2, material considerations, in the use of corrosive mine experiments more laboratory workbench, to consider the material, corrosive industries, etc. to be manufactured with corrosion-resistant materials.

3, the right size, according to the experimental content to choose the size of the shape of the laboratory bench, the volume is too large to cause waste, too small to affect the use.

4, after the installation is completed, but also to check again as a whole, to see whether the parts are in some positions, fasteners are solid, verticality, parallelism, coaxiality other geometric requirements of the location need be corrected.

We know that we need to understand the type of laboratory bench, according to the actual situation to choose the equipment they need, so that there will be no mistakes.